Products
Aluminium casting products, cast to your drawing.
Metline Casting produces aluminium sand cast components across nine categories, sized from 0.1 kg to 110 kg per piece and finished to your specification.
Product Categories
Nine categories of aluminium castings.
Every part below is sand cast in-house, then heat treated, impregnated, finished and machined as the drawing requires. If your component isn't listed, it almost certainly still fits — these are categories, not a catalogue.
Auto Parts
Aluminium castings for automotive assemblies — housings, covers, brackets, pulleys and mounting plates, cast to drawing and machined on our VMC line to final tolerance.
Tractor & JCB Parts
Structural and drive aluminium castings for tractors, trailers and earthmoving machinery — gearbox covers, hydraulic housings, linkage brackets and end caps built to survive field duty.
Fire Fighting Parts
Aluminium valve bodies, couplings, branch pipes and nozzle fittings for fire fighting systems, vacuum impregnated where the part has to hold pressure without weeping.
Lighting Parts
Cast aluminium light housings, heat sinks, bezels and pole fittings — the high thermal conductivity of aluminium pulls heat away from LED assemblies.
Hydraulic Components
Aluminium hydraulic manifolds, valve blocks, pump bodies and port fittings, machined to sealing-face tolerance and pressure-tested against porosity.
Transmission Components
Aluminium transmission and drivetrain castings — bell housings, gearbox casings, bearing carriers and clutch covers, typically supplied in LM25 for T6 strength.
Aerospace Parts
Close-tolerance aluminium castings for ground support and non-flight-critical aerospace hardware, with 100% dimensional inspection against drawing.
Marine Parts
Corrosion-resistant aluminium castings for marine service — pump bodies, seawater fittings and deck hardware, usually cast in low-copper LM6 for salt-water durability.
Gift Article Items
Decorative and specialty aluminium castings — trophies, plaques, nameplates and architectural detail, finished by belt grinding and blasting to a clean, paint-ready surface.
Not sure which alloy your part should be cast in? Our aluminium alloy reference covers LM2, LM6 and LM25 in full — composition, mechanical properties, casting suitability and heat treatment — or read how the aluminium sand casting process shapes what is and isn’t practical to cast.
Custom Casting
Have a drawing, sample or existing part?
Send it across and our team will review geometry, wall sections and tolerances to confirm castability and pricing.
Talk To Us
Mr. Hensi Dashlani
+91 78787 78007Mr. Nirav Kavathiya
+91 83066 77799metlinecasting@gmail.comExplore Next
Where to go next.
Start a Program
Send your drawing or sample — we’ll cast it right.
From core making to finished, inspected components, Metline Casting runs the full aluminium casting process in-house.